March 25, 2022 Networking 55 Views
Networking Essentials Version 2 Answers 2022. The course also introduces networking devices and the cisco ios® software. Network essentials final exam answers 100% 1. Networking essentials practice final exam answers full 100% 2019 what is the reason that electronic data is represented as bits in computer processing and data communication? Getting online group exam answers full 100% 2021 how many unique values are possible using a single binary digit? 2.3.1 for hosts to reach remote networks, they must send traffic to a local router that can route the traffic to the correct destination network.
Difficulty Of Setup Lack Of Centralized Administration High Degree Of Complexity High Cost Explanation:
Utp cable wire pairs can be terminated in different. Press “ctrl + f” in the browser and fill in whatever wording is in the question to find that question/answer. Bits are more efficient for storing data.
May 20, 2021 · Networking Essentials 2019 This Course Introduces A Variety Of Topics To Build Students’ Skills And Understanding Of Networking.
Specifying the bandwidth of the channel or medium for each type of communication specifying the device operating systems that will support the communication. Difficulty of setup lack of centralized administration high degree of complexity high cost explanation: 1 2 4 8 9 16 answers explanation & hints:
Getting Online Group Exam Answers Full 100% 2021 How Many Unique Values Are Possible Using A Single Binary Digit?
Bits are the format best understood by people. Last updated on may 20, 2021 by admin. Introduction to cisco networking group exam answers full 100% 2021 what type of cable is used to connect a workstation serial port to a cisco router console port?
A Technician Verifies That Other Workstations Can Successfully Connect To The Internet.
Introduction to cisco networking group exam: Netess v1 student lab source files answers: (choose three.) servers desktop pcs mobile laptops printers gateways tablets answers explanation & hints:
Last Updated On May 20, 2021 By Admin.
Network protocols and architecture group exam answers full 100% 2021 what is the purpose of protocols in data communications? Data communications and network services group exam answers how to find: An employee reports the inability to connect to the internet.
Networking Essentials v2.01 Modules 1 – 4 Internet Connection: Getting Online Group Exam
1. Which factor classifies a host as a server?
the software installed*
the CPU speed
the amount of memory
the network connection
Explanation: A server is a host with server software installed. Although CPU, memory, and the network connection will determine the performance of a server, it is the server software that provides desired server services.
2. What terms represent the maximum and actual speed that can be utilized by a device to transfer data?
throughput; goodput
bandwidth; throughput*
bandwidth; goodput
throughput; bandwidth
Explanation: Bandwidth measures the maximum rate at which a device can transfer data. However, in practice, the actual speed for data transfer could be reduced because of numerous factors like network congestion, overhead etc. This actual rate of transfer is known as throughput.
3. Match the term to the value represented.
Networking Essentials v2 Modulos 1 – 4 p3
4. What is a disadvantage of deploying a peer-to-peer network model?
high cost
high degree of complexity
difficulty of setup
lack of centralized administration*
Explanation: The simplest peer-to-peer network consists of two computers that are directly connected to each other through the use of a wired or wireless connection. The primary disadvantages of a peer-to-peer network are its lack of central administration, minimal security, and its lack of scalability.
5. Which term is used to describe a network device that relies on another device to obtain information?
console
client*
web server
server
Explanation: A client device has software installed which enables it to request the required service from a server device. For instance, a user who uses a web browser is effectively requesting pages from servers all over the web. In this case the browser is considered the client, whereas the device that is responsible for answering the request is considered the server.
6. If you were drawing a physical topology of your school network, what type of information would you include?
the path that data takes to reach destinations
the location of devices in the building*
the IP addresses of all devices on the network
how devices are connected
Explanation: A physical topology is a diagram that shows where all the devices are physically located in the building.
7. Which type of network component can be used to share an attached printer to the network?
peripheral
access point
network media
personal computer*
Explanation: A peripheral is a device that is not directly connected to a network. In order to be made available on a network, a host is responsible for sharing the peripheral across the network.
8. A wireless network was recently installed in a coffee shop and customer mobile devices are not receiving network configuration information. What should be done to correct the problem?
Make sure the DHCP server is functional.*
Ensure that the default gateway device is working properly.
Provide peripheral devices to customers.
Check the connection of the DNS server to the Internet.
Explanation: End-user devices can request an address from a pool of addresses that are maintained by a DHCP server.
9. A consumer places a smartphone close to a pay terminal at a store and the shopping charge is successfully paid. Which type of wireless technology was used?
3G
Wi-Fi
Bluetooth
NFC*
Explanation: NFC is a wireless technology that allows data to be exchanged between devices that are in very close proximity to each other.
10. A user is looking for a wireless headphone for listening to songs stored on a smartphone. What wireless technology would the headphone use?
3G/4G
Wi-Fi
infrared
Bluetooth*
Explanation: Bluetooth is a wireless technology for data exchange over a short distance. It is suitable for connecting devices with simple tasks, such as headsets, keyboards, mice, and printers. Wi-Fi is suitable for variety of applications with high speed wireless connectivity required or preferred. Infrared requires a direct line of sight between the transmitter and the receiver. 3G/4G are cellular network technologies to manage voice calls and data transmission between clients and service providers.
11. Refer to the exhibit.
Networking Essentials v2 Modulos 1 – 4 p11
A home wireless network is being configured within Packet Tracer. The user adds a wireless router, a PC, and three laptops. The user is reviewing the wireless connection on one of the laptops. What can be determined?
All three laptops are connected to the wireless network successfully.
Because the password is not enabled, the laptop cannot connect to the wireless router.
The laptop is connected to a wireless network.*
The laptop must have a different wireless NIC installed before being able to connect to the wireless router.
Explanation: A home wireless router could be configured for a 2.4 GHz and multiple 5 GHz wireless networks, each with a unique SSID such as QuizMe3, QuizMe2, and QuizMe. The wireless NIC is active and connected to a wireless network as indicated by the words Adapter is Active. The wireless router has not been configured with wireless security.
12. Refer to the exhibit.
Networking Essentials v2 Modulos 1 – 4 p12
A student has started a Packet Tracer network that includes a home wireless router to be used for both wired and wireless devices. The router and laptop have been placed within the logical workspace. The student clicks on the laptop and the window that opens is shown in the exhibit. What is the purpose of the modules on the left?
This is a list of modules available from the manufacturer that can be clicked on and “purchased.”
This is the list of modules currently installed in the laptop.
These are modules that can be used by double-clicking on one module so that it automatically installs into the laptop.
These are optional modules that can be installed into the module slot if it is currently empty.*
Explanation: Modules on the left can be installed into the shown device, in this case a laptop. Be sure to power the device off before installing any option.
13. Refer to the exhibit.
Networking Essentials v2 Modules 1 – 4 p13
Which menu item would be used to bring up a command prompt environment to be able to ping another network device?
Attributes
Desktop*
Config
Programming
Physical
Explanation: The Desktop menu item is used to access common applications and windows used to configure a device such as the IP address, command prompt, web browser, as well as other apps.
14. Refer to the exhibit.
Networking Essentials v2 Modules 1 – 4 p14
An instructor wants to show a few prebuilt Packet Tracer sample labs in class. Which menu option would the instructor use to access a sample lab?
View
Edit
Tools
File*
Extensions
Options
Explanation: Use the File > Open Samples menu option to browse for the samples provided with Packet Tracer.
15. Refer to the exhibit.
Networking Essentials v2 Modules 1 – 4 p15
A student is creating a wired and wireless network in Packet Tracer. After inserting a router, switch, and PC, the student chooses a straight-through cable to connect the PC to the switch. Which connection would be the best port for the student to choose on the PC?
RS 232
USB0
USB1
FastEthernet0*
Explanation: A PC to switch connection is through an Ethernet cable. Connect FastEthernet0 on the PC to any Ethernet port on the switch.
16. Which criterion can be used to select the appropriate type of network media for a network?
the types of data that need to be prioritized
the number of intermediary devices that are installed in the network
the environment where the selected medium is to be installed*
the cost of the end dev
Explanation: Criteria for choosing a network medium are the distance across which the selected medium can successfully carry a signal, the environment in which the selected medium is to be installed, the amount of data and the speed at which the data must be transmitted, and the cost of the medium and its installation.
17. Which statement describes the use of the ping command?
The ping command tests end-to-end connectivity between two devices.*
The ping command can be used to determine the exact location of the problem when troubleshooting reachability issues.
The ping command shows current Layer 4 sessions.
The ping command can be used to test reachability using the physical address of the device.
Explanation: The ping command is used to test end-to-end connectivity between the source and destination IP address. It measures the time it takes a test message to make a round trip between the two end points. However, if the message does not reach the destination, or in the case of delays, there is no way to determine where the problem is located.
18. What are two sources of electromagnetic interference that can affect data transmissions? (Choose two.)
microwave oven*
infrared remote control
florescent light fixture*
cordless phone
LED monitor
Explanation: Electromagnetic interference or EMI is commonly caused by equipment such as microwave ovens and fluorescent light fixtures.
19. What are two advantages of using fiber-optic cabling to interconnect devices? (Choose two.)
Fiber-optic cables use extra shielding to protect copper wires.
Fiber-optic cables are commonly found in both homes and small businesses.
Fiber-optic cables are easy to install.
Fiber-optic cables can extend several miles.*
Fiber-optic cable is immune from EMI and RFI.*
Explanation: Fiber-optic cables provide immunity to both EMI and RFI and a single cable can extend for several miles before regeneration is needed.
20. Which type of network cable is commonly used to connect office computers to the local network?
glass fiber-optic cable
twisted-pair cable*
plastic fiber-optic cable
coaxial cable
Explanation: Twisted-pair is a type of copper cable used to interconnect devices on a local network.
21. Which of the following is a low-power, shorter range wireless technology that is intended to replace wired connectivity for accessories such as speakers or a mouse?
NFC
GPS
Wi-Fi
Bluetooth*
Explanation: Bluetooth is a low-power, shorter range wireless technology that is intended to replace wired connectivity for accessories such as speakers, headphones, and microphones. Bluetooth can also be used to connect a smartwatch to a smartphone.
22. Which of the following is a wireless communication technology that enables a smartphone to communicate with a payment system within a few centimeters away?
NFC*
GPS
Wi-Fi
Bluetooth
Explanation: Near Field Communications (NFC) is a wireless communication technology that enables data to be exchanged by devices that are in very close proximity to each other, usually less than a few centimeters.
23. A physical topology diagram includes which of the following? (Choose three)
where hosts are located*
IP addressing on each device
where networking devices are located*
device names
where wiring is installed*
Explanation: A physical topology diagram records information such as where each host is located, where network devices are located, and how these devices are connected to the network.
24. When a network administrator changes the IPv4 and IPv6 address of a computer, which topology diagram will need to be updated?
physical topology diagram
logical topology diagram*
both physical and logical topology diagrams
Explanation: A logical topology diagram records information such as device names, IP addressing, configuration information, and network designations.
25. Which type of network cable is used to connect the components that make up satellite communication systems?
fiber-optic
coaxial*
unshielded twisted-pair
shielded twisted-pair
Explanation: Explanation: Coaxial cable is commonly used to connect the various components that make up satellite communication systems and cable TV.
26. When authenticating within Packet Tracer, which two items could you use? (Choose two.)
a username associated with a specific school
an email address found in the NetAcad profile*
a username associated with NetAcad*
a previously configured pattern
a previously configured PIN
Explanation: When Packet Tracer first opens, an authentication screen appears. Use the email address in the NetAcad profile or a username associated with NetAcad.
27. Which network device is used to translate a domain name to the associated IP address?
router
DHCP server
DNS server*
default gateway
Explanation: A DNS server is a network device that is used to translate a domain name to its IP address. A user will identify a website using a domain name, such as www.cisco.com and a DNS server will translate it to an associated IP address.
28. How many unique values are possible using a single binary digit?
9
4
1
8
16
2*
Explanation: A bit is stored and transmitted as one of two possible discrete states. Each bit can only have one of two possible values, 0 or 1. The term bit is an abbreviation of “binary digit” and represents the smallest piece of data.