Explanation:SLAAC uses ICMPv6 messages when dynamically assigning an IPv6 address to a host. DHCPv6 is an alternate method of assigning an IPv6 addresses to a host. ARPv6 does not exist. Neighbor Discovery Protocol (NDP) provides the functionality of ARP for IPv6 networks.
UDP is the transport layer protocol used by DHCPv6.Which protocol supports Stateless Address Autoconfiguration (SLAAC) for dynamic assignment of IPv6 addresses to a host?
For All Questions: CCNA1 ITN Chapter 7 Exam Answers 2019
Which protocol supports stateless address autoconfiguration Slaac for dynamic assignment of IPv6 address?
Which protocol supports Stateless Address Autoconfiguration (SLAAC) for dynamic assignment of IPv6 addresses to a host? Explanation:SLAAC uses ICMPv6 messages when dynamically assigning an IPv6 address to a host. DHCPv6 is an alternate method of assigning an IPv6 addresses to a host.
Which protocol does Slaac support for dynamically assigning host IPv6 addresses?
Answers Explanation & Hints: SLAAC uses ICMPv6 messages when dynamically assigning an IPv6 address to a host.
What is IPv6 stateless address autoconfiguration?
Stateless address autoconfiguration is the process that IPv6 nodes (hosts or routers) use to automatically configure IPv6 addresses for interfaces.
What is Slaac stateless address autoconfiguration )? How does it work?
The new method that IPv6 introduces is called Stateless Address Autoconfiguration(SLAAC), and described in RFC 4862. SLAAC works by combining part of the address from an interface's gateway, learned via Router Advertisements(RAs), and an interface's layer 2 address with “ff:fe” shoved in the middle of it.