How do I fix the last USB device you connected to this computer malfunctioned

Here you will find out:

• what to do if you get “The last USB device malfunctioned” error

• how to fix this error

• how DiskInternals Partition Recovery can help you

Are you ready? Let's read!

Did you just see “The last USB device malfunctioned” error?

Irrespective of your Windows version, you likely have received this error message: "USB device not recognized". This has become a common error for most PC users; however, there are ways to fix the error and get your PC to recognize every USB drive you connect. It may be that your computer's USB port is the cause of this error, or it could be the USB/flash drive itself.

How to fix this error

Method 1: Reconnect the malfunctioned USB device

Simply remove the USB drive and reconnect it to the computer. Sometimes, this method works, and your PC can read the USB.

Method 2: Use a different USB port

If you have removed and reinserted the USB several times and the error still persists, then you should try another USB port on the computer, or change the USB cable (connector) if you’re connecting a mobile device.

Some computers come with many USB ports; try all of them one after another. Don’t use a USB hub, though; try connecting the device directly to the computer.

Method 3: Reinstall USB drivers

It may be that your USB drivers are outdated or not properly installed. Drivers are what enable your PC to operate external devices. When they are not configured properly or outdated, your PC will likely display several error messages.

On Windows 10:

• Press Windows key + R and type “devmgmt.msc”, then press the Enter key to launch Device Manager.

• Scroll down to the bottom and expand the Universal Serial Bus option.

• Right-click on the drivers you see there and select "Uninstall".

• Uninstall all the drivers and restart the computer.

Don't worry: all the drivers will be reinstalled automatically while your PC reboots.

Method 4: Change properties in USB Root Hub

This method is similar to the one above; however, here you will fix the properties of USB Root Driver instead of uninstalling the drivers.

On Windows 10:

• Open Device Manager and go to "Universal Serial Bus controllers".

• Expand the option and double-click on "USB Root Hub".

• Toggle to the “Power Management” tab and turn off the power saving feature.

Recover data from the malfunctioning USB device

To be on the safe side, recover all the files saved on the USB drive that is causing you problems. This way, you will prevent losing your important files in case the USB drive is physically damaged. DiskInternals Partition Recovery can help you in recovering data from the USB drive.

DiskInternals Partition Recovery is a professional data recovery utility that supports three different modes: the “Reader” mode, for example, can help you recover files from an unrecognized USB device. It is quite easy to use DiskInternals Partition Recovery; the interface is intuitive and user-friendly.

Note: Using Reader mode is the best way to recover files from an unreadable disk. This mode will load your files in a format similar to Windows File Explorer.

DiskInternals Partition Recovery also supports “Uneraser Mode” and “Full Recovery Mode”. However, the trial version doesn’t allow you to recover the deleted/lost files; you can only preview them. Upgrade to the Pro version to recover files.

Related articles

FREE DOWNLOADVer 8.7, WinBUY NOWFrom $139.95

Please rate this article.

6 Fixes| USB Device Malfunctioned and Not Recognized

Here are the solutions to the USB device malfunctioned and is not recognized issue. If you have this USB device error, don't worry. Use the methods below to make your USB recognizable and usable again.

"USB device not recognized" is an error that usually occurs on Windows computers when you plug in a USB device. When Windows generates such an error, the USB will not show up on your computer, and you can't access your data. In different situations, the error is followed by various messages:

"The last USB device you connected to this computer malfunctioned, and Windows does not recognize it."

"One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message."

How to Fix USB Device Not Recognized in Windows

If your device is not recognized on your computer, try the six solutions below to make it show up again. We strongly recommend you follow the below methods in sequence. Since there are many reasons that lead to a Windows failed to recognize the USB device error, each method is for a specific scenario.

Fix 1. Unplug Your Computer from the Power Source

This sounds like a piece of cake thing to do but it works! For most unrecognized USB devices, there is typically nothing wrong. A simple computer restart could resolve the issue. This method reboots the motherboard, which has all of the computer hardware connected to, including the USB ports. Rebooting the motherboard usually helps solve the temporary insufficient power supply for outside devices.

Step 1. Cut your computer power at its source, which is unplugging your computer from the wall outlet.

Step 2. Leave the computer unplugged for a few minutes, and then plug it back into the wall outlet.

Step 3. Check if the computer detects the USB device and assigns it a drive letter.

If this fix didn't work, don't panic. Follow the other fixes below.

Fix 2. Change the USB Port

Is your computer's USB port not working properly? Check the available USB ports one by one and see whether it is a computer hardware problem or a problem with the device itself. If changing to another port solves the problem, then there is something wrong with the previous port. You can give up on that broken port, or send your computer for repair. 

Fix 3. Uninstall USB Device Driver to Make USB Recognizable

If the USB drivers are unstable or damaged, this method removes those drivers. Know that uninstalling the drivers can cause all USB ports to become dysfunctional.

Step 1. Right-click on the Windows logo and choose Device Manager.

Step 2. Find and expand Universal Serial Bus controllers, right-click on any of the USB drivers, and click Uninstall. Do this for all USB drivers one by one.

Step 3. Restart your PC. The USB drivers will automatically reinstall and solve the corrupted USB devices problem.

Fix 4. Update/Rollback a Device Driver

Many YouTube videos and IT forums suggest using Device Manager to troubleshoot non-recognizable USB devices. Give this method a go and see if it works for you.

Step 1. Right-click on the Windows logo and choose Device Manager.

Step 2. Expand "Universal Serial Bus Controllers" and you will see an item called "Generic USB Hub". Righ-click on the first Generic USB Hub and choose "Properties".

Step 3. Navigate to the "Driver" tab and choose "Update Driver".

Step 4. When asked how do you want to search for driver software, there are two options. 

1. Search automatically for updated driver software

This way uses an automatic update by Windows. When this is finished, all you need to do is to disconnect the USB device, restart the computer, and reconnect the USB device again. Windows will install the latest driver for you.

2. Browse my computer for driver software

When you choose this option, you need to continue with the pop-up "let me pick from a list of device drivers on my computer."

From the list, select Generic USB hub, which is normally the only choice. Click "Next" and then Windows will install the driver for you.

 TipIf updating the driver doesn't help solve the USB device problem, try to update each Generic USB Hub until you have updated all.

In the same path as updating the driver, roll back to the previous driver when the error didn't occur. Instead of selecting "Update Driver" in the "Driver" tab, choose "Roll Back Driver" this time.

The changes made on the computer power and the device driver should take effect, and your USB device will no longer report issues. If this is not the case, try the other three methods one by one.

Fix 5. Change the USB Selective Suspend Settings

Another possible reason your USB malfunctions is that the hub driver suspends the USB automatically. In this case, changing the USB selective suspend settings could help.

Step 1. Right-click on the Windows icon and click Power Options.

Step 2. In the Choose or customize a power plan window, click Change plan setting.

Step 3. In the Edit Plan Settings window, click Change advanced power settings.

Step 4. In the Power Options window, find and expand USB settings, expand USB selective suspend settings, and Disable both On battery and Plugged in settings.

Step 5. Click Apply and then OK to save the settings.

Fix 6. Fix USB Root Hub

The USB root hub is the software driver that lets you connect multiple USB peripherals to your computer. Most computers have multiple root hubs so you can share the data bus across multiple devices. So, if the computer cannot recognize your USB drive, try to fix the USB root hub.

Step 1. Open Device Manager, find the Universal Serial Bus controllers option, and single-click it to expand it.

Step 2. Find the USB Root Hub option in this category, right-click it, and choose Properties.

Step 3. Go to the Power Management tab and uncheck the "Allow the computer to turn off this device to save power" option. Then, click OK to save your changes.

Fix 7. Turn to Remote USB Repair Service

If you still cannot fix your USB drive, you can turn to experts. Our USB repair experts can solve your problems easily.

Consult with SalvageData's experts to retrieve data from inaccessible or corrupted data from all brands and formats of digital media.

• Certified ISO–5 class 100 cleanroom recovery
• Free diagnostic, no data, no charge
• Support all operating systems and devices
• Offer a range of turnaround times for fast recovery

Further Troubleshooting: Data Recovery from USB Flash Drive 

The six ways we outlined above are all the possible ways to fix the "USB device malfunctioned and not recognized" error.

If one of the fixes worked, you should be able to access your USB and use the saved data on it again.

If you have resolved the problem but find that data is missing from your USB flash drive, you need third-party software to retrieve your data. Here, EaseUS disk data recovery can help when your USB device does not show up on your computer but appear in Disk Management. The program works very well in Windows 10/8/7/XP and previous versions.

EaseUS Hard Drive Data Recovery Software

• Recover data from SD card, emptied recycle bin, memory card, flash drive, digital camera, and camcorders
• Restore data for sudden deletion, formatting, hard drive corruption, virus attack, system crash under different situations
• Repair corrupted files on the USB drive, including damaged photos, videos, and documents

Step 1. Choose the USB drive to scan

Launch EaseUS Data Recovery Wizard and choose your USB drive where you lost important files. Click "Scan" to start.

Step 2. Check and preview USB drive data

When the scanning is finished, you can quickly locate a specific type of file by using the Filter feature as well as the Search option.

Step 3. Restore flash drive data

After checking and finding lost USB drive files, click "Recover" to restore them. You shall save the found files to a safe location on your PC rather than to your USB drive.

When you retrieve data from USB devices, we suggest you save retrieved files to a secure location to avoid further problems. 

Bonus Tip: Format USB to NTFS/FAT32 and Recreate Partition on USB

A few people encountered the issue more than once. They said the same USB device started malfunctioning again after a short period of repairing it. If this is the case with you, formatting and recreating a new partition can help.

• Connect the USB to the PC, right-click on This PC/My Computer, and select Manage.
• Enter Device Manager, select Disk Management, locate and right-click on your malfunctioned USB, and select Format volume...
• Finish the format process and set the file system to NTFS or FAT32.

Check whether the USB shows up on your computer or not. If not, follow the steps below:

• Open Disk Management, right-click on USB, select Delete Volume, and complete the process.
• When USB shows as unallocated, right-click on it, select New Simple Volume, set the drive letter, set the file system (NTFS/FAT32) for it, and complete the process. 

After this, you should be able to access the USB drive on your PC and save data on it again.

Video Tutorial: Make USB Recognized by Yourself

This video collects 4 reliable solutions that are introduced above and you can also follow them to fix USB device not recognized issues by yourself.

How do you fix the last USB device you connected to this computer malfunctioned and Windows does not Recognise it?

How do I fix a malfunctioned USB device?

What does it mean when a USB device has malfunctioned?